Skip to main content
Older versions of Internet Explorer will not support certain site features. Chrome, Safari, Firefox, and Edge will provide the best experience.
Installing Platform, Care Connect Web, Device Preferences 1.9
The steps in this topic describe how to install the Care Connect Platform, Care Connect Web, and Device Preferences on the Care Connect Server using the Care Connect Suite Installer.
Accessing the Administrative Interface
This topic contains instructions for accessing the Care Connect administrative interface.
Configuring System Settings
This topic contains instructions for configuring the general system as part of the required Care Connect Server Settings.
Configuring Device Preferences and Spok Mobile Adapter (If Applicable)
This topic contains instructions for configuring Device Preferences and Care Connect Web.
Configuring HTTPS Support
This topic helps with configuring HTTPS support.
Managing Tenants
This topic helps with managing tenants in the Device Preferences system.



Installing Platform, Care Connect Web, Device Preferences 1.9

      The Care Connect Platform, Care Connect Web, and Device Preferences are all installed together on the same server using the Care Connect Suite Installer. Use the "Running the Care Connect Installer" instructions below, and in the Custom Setup dialog, set up the following for installation:

      • Platform
        • Web Site
        • Web Service
        • Adapter Service
        • Deploy Database
      • Web
        • Web Site
        • Web API Service
        • Deploy Database
      • Device Preferences
        • Web Site
        • Deploy Database

      The rest of the features/components should be set to Entire feature will be unavailable.

      Using the Care Connect Suite Installer

      The Care Connect Suite installer is used to install or perform upgrades of Spok Care Connect Suite 1.9 components.

      At the end of installation, you must provide an XML license file that activates features. Be sure to have this XML license available before starting the installation process.

      1. Navigate to the Spok Care Connect installation media.
        Spok Care Connect Server.exe, Spok Care Connect Server.msi, and the Prerequisites folder must reside in the same location.
        Spok Care Connect Server.exe and the Prerequisites subdirectory must reside in the same folder.

      2. Right-click Spok Care Connect Server.exe and click Run as Administrator.

      If the Spok Care Connect Server.exe does not run, unblock the file.

      1. Right-click Spok Care Connect Server.exe.

      2. Click Properties.

      3. In the Security area, under the General tab, select Unblock.

      4. Click OK.

      1. In the Spok Care Connect Server Setup window, click Install.

      If there are missing prerequisites that need to be installed, you will be notified or the program will install them at this time. 

      If a message appears that states Setup Successful – The computer must be restarted in order to continue, click Restart. The installer will restart the computer and resume installation after the system is back up.

      1. When the Welcome to the Spok Care Connect Setup Wizard message displays, click Next to continue to the Custom Setup window.

      2. Select the features to install for the current system.

      3. (Optional) If necessary, you can manually configure where features are installed.

      4. After your selections are made, click Next.

      5. In the Database Configuration dialog, configure the available fields with the following information:

        If the Deploy Database option was not selected on the Custom Setup dialog, the Database Configuration dialog will only have the Server field available. See Running SQL Scripts Outside of the CCS Installer for more information.

        • Server—Enter the SQL Server name or IP address.
          If there is an instance, add a backslash and the instance name after the server name. For example: Be very careful with your entry in this field when installing a mirror server during an upgrade. The Test Connection function does not test for the mirror server and will not catch errors in this field.

        • Database—Enter the name of the database that is being used in the new system. The field auto-populates the default name “master”. When you install Spok Mobile or Care Connect Speech, this field must always point to the Care Connect Suite database server.

        • Integrated Security—Select this option to use the current Windows user account to access the SQL Server database during installation. The Windows user account must have "sysadmin" rights.

        • Username—Enter the user name linked to the server. The username entered in this field must have “sysadmin” rights. For example: spokadmin. This user will be used during installation only.

        • Password—Type the password linked to the username. The password entered in this field must be linked to a user that has “sysadmin” rights.

      6. Click Test Connection to attempt to connect to the server database with the user credentials you provided. If the connection was successful, the Ready to install Care Connect dialog appears.

      7. In the Ready to install Care Connect dialog, click Install. The installer makes all of the necessary configurations to IIS and deploys the application directly to IIS.

      8. Click Finish when the installation is complete. The Setup Successful dialog displays, but you will still need to import the license file. 

      Importing a License File

      If you installed Platform components, the Import License page will automatically open in a browser at the end of installation. It may also appear when you access the administrative interface for the first time.

      If the Import License page does not automatically display in either of these scenarios, or you need to access it to re-import a license file, you can access it at the following URL: http://IP_ADDRESS/Web/Public/Home/ImportLicense.

      The license file for your tenant must be imported into the client system before you can sign in. After this file is uploaded to the client system, each client will have the appropriate permissions.

      1. Access the Import License page.
        You can access it at the following URL: http://IP_ADDRESS/Web/Public/Home/ImportLicense.

      2. Click Browse to search for the license file.
        Spok’s Maintenance department will provide this license file.

      3. Browse to the appropriate XML license file.
        The name of the XML file should include the tenant name. For example, if the tenant name is “ABCHospital,” the XML file that should be chosen might be named “ABCHospital.xml”.

      4. Click Upload to upload the XML license file.

      5. If the upload was successful, a success message will appear, which includes the username needed to sign in. Write the username down and click Finish.

      Updating the Configuration Service URL

      The Configuration Service URL is updated using the Config Manager. The Config Manager appears in a web browser when the Care Connect Suite Installer successfully installs any of the following features: 

      • Platform: Web Site, Web Service, Adapter Service
      • Mobile: Web Site, Web Services, Windows Services
      • Web: Web Site, Web API Service
      • Device Preferences: Web Site
      • Speech: Speech Service
      • CTI: CTI Server Service

      The Config Manager will also display the first time you log in to the Administrative interface. The Platform Server Name or IP page will display after login if IIS detects that a connection to the current configuration service cannot be made. You will need to enter a valid configuration service URL in order to continue to the Administrative pages.

      If the Platform Server Name or IP page does not automatically display or you need to access it to update the URL, you can access it at the following URL: http://IP_ADDRESS/ConfigManager/

      1. If this page does not automatically appear in a web browser (or you want to return to it), navigate to http://IP_ADDRESS/ConfigManager/.
      2. In Platform Server Name or IP, enter or edit the address of the Platform Config Service, ensuring that it now points to the correct address if necessary. Select https if needed. 
      3. Click Save.
        The system will test whether the server name or IP address has been changed successfully, or if the change has failed for some reason. If the connection to the configuration service has failed, check your server name or IP for errors and try again. In order to proceed with implementation, you must save a valid configuration service URL.
      4. Restart IIS on all Care Connect application and Platform servers before continuing with any further configuration.
        1. To restart IIS, open a new Command Prompt or PowerShell instance.
        2. Type iisreset, and press Enter.
        3. IIS successfully restarted.
      5. Repeat the IIS restart step on all Care Connect application and Platform servers before continuing with any further configuration.

      Troubleshooting and Tips

      How do I select or remove features to install?

      • The Custom Setup dialog allows you to select the components and features you wish to install and manually configure the installation locations.
      • In the Custom Setup dialog, you can adjust your view of the list by clicking the plus (+) and minus (-) signs next to the listed features.
      • Each component/feature in the Custom Setup dialog has a drop-down icon that can be clicked to access a menu of options.
      • By default, each component/feature is set to Will be installed on local hard drive.

      When and why do I need to re-license?

      In some cases, a license file may need to be re-imported using the same licensing procedure as before. A license needs to be re-imported into the system in the following cases:

      • A new feature is added
      • A new mobile site is added

      Is there more information about restarting IIS?

      Yes. See Restarting IIS (Server) for more details about restarting IIS.

      Updating the Application Pool Identity

      After you have finished running the Care Connect Suite installer,  you must update the identity of the Application Pool before proceeding with Configuration steps. This identity is the login for connecting to the server.  The Identity is typically a service account identified by the customer.  This service account must have access to the Shared Asset Location

      Both the SpokServicesAppPool application pool and the Amcom Mobile Connect Services application pool must be updated so that the Shared Asset Location can be accessed by the Platform and Mobile servers.

      The Application Pools are updated from IIS > Application Pools.  Right-click on SpokServicesAppPool, then select Advanced Settings.  Select Identity from the list of available settings.  Select Custom > Set, and enter the service account username and password provided by the customer.

      The following example screenshots depict updating the application pool identity.